So small and compact for the power, with 10,000mAh 400CA it packs quite a punch!
This 10,000mAh iTechworld Jump starter is a great little gadget that can start your car is 5 easy steps.
1. Plug the battery clamps into the jump starter.
2. Connect the battery clamps to the flat starter battery of the vehicle.
3. Start the vehicle. ( If the vehicle fails to start first time, wait 30sec before trying to start again. Do not try to start vehicle if jump starter below 50% charge.)
4. Once the vehicle starts remove the jump cable from the battery ASAP.
5. Disconnect the clamps from the vehicle.
It has a handy bright LED light so there is no difficulties in seeing it anytime.
It even has a USB 2.0 port that you can use to charge devices such and mobile phones, tablets, portable speakers etc..
FEATURES:
- 10,000mAh 400CCAmp peak current – can jump start most petrol 12V vehicles.
- Built-in torch with ultra-bright LED.
- Digital Products Charging is done via one USB 2.0 output port allowing charging of your smartphones, tablets, cameras and other 12V digital devices.
- Compact design and so light weight, very easy to carry.
- Intelligent circuitry.
- Over current protection.
- Short circuit protection.
- Overload protection.
- Over-voltage protection.
- Over-charge protection
- 10000mAh
- USB Port: 5V 2.1A
- Input: 15V/1A
- Starting current: >200CCA
- Peak current: 400CCA
- LED life: 100,000H
- Operating Temperature: -20°C-60°C
- Jump starter unit size: 145x75x23mm Weight 270g
- Storage case: 195x255x50mm
- Statutory warranty is 12 months from date of purchase.
- Please read instructions in full before using.
PACKAGE CONTENTS:
- 1 x iTECH400CCA Multi-function Jump Starter.
- 1 x AC Charger.
- 1 x Car Charger.
- 1 x Battery Jumper Clips.
- 1 x User Manual.
- 1 x Jump Starter case.
Gross Weight 0.6kg
(iTech400A)
SKU | iTech400A |
Brand | iTech World |
Shipping Weight | 0.6000kg |
Shipping Width | 0.195m |
Shipping Height | 0.050m |
Shipping Length | 0.255m |
Shipping Cubic | 0.002486250m3 |