BLACK POWDER COAT Hammertone as standard
The bar is designed to suit both Dmax & MUX, we will provide rubber pinch weld with the bullbar to help follow the contour of the head lights.
1) Full Bumper Replacement
2) 1 piece fully welded design.
3) Low Profile 110mm From Badge to front of bar.
4) Extremely Low Weight- 34kg Bullbar, 16kg Winch Cradle & 10Kg bash plate.
INCLUDES WINCH CRADLE - Can suit upto 12,000lb Low mount Winch.
INCLUDES BASH PLATE AND LED FOG LIGHTS
- Made from 8mm steel main winch cradle & 3mm side wings reinforced
- ADR69 compliant and airbag compatible
- Meets AS4876.1 2002
- Suits most low mount winches upto 12,000LB
- Rated tow points(3500-4000 kg each Tested) Recommended use with bridal and winch only. Snatch strap can exceed 8T total that is why recommended as a tow point Fits with Aftermarket dedicated recovery points such as roadsafe.
- Powder coated in texture black or can be colour matched(Additional Cost)
- bash plate back to front diff included
- Fits factory fog lights
- Loop does not protrude past the front of the bar
- Can suit 9inch LED spot lights or LED bars.
- 2x Spot light mounting points are located on the loop bar.
- The bar can be adjusted approx 20mm from the fender or can be adjusted to sit flush.
- Its a complete bumper replacement making install time frame 2.5-4Hr
- Install Difficulty = Medium (Some Trimming required)
The standard finish is as follows.
1) Main bullbar & Loop colour matched to 4WD.
2) Centre winch section Black Hammertone for durability.
3) Fog Lights - Black Hammertone for durability.
4) Bash Plate - Black Hammertone for durability.
- Extra cost to have it colour coded to vehicle