Airbag Man Rear Air Suspension Helper Kit – Nissan XTrail

$395.00

Available Options


Calculate Shipping


Standard Shipping - 6 - $35.00
Standard Delivery Australia. Unless noted in the delivery instructions, the goods will be left at the front door if unattended. Please track your parcel to confirm delivery date.
Pick Up POA
Pick Up Available at our Show room at 10/419-425 Old Geelong Rd, Hoppers Crossing VIC 3029 upon order. Please give us a call on 03 9931 1160 or email us at info@traxindustries.com.au for confirmation of stock BEFORE ordering ** Extra Shipping costs apply if the item is not in stock **

The Airbag Man Air Suspension Helper Kit – Coil Springs Nissan X-Trail provides a smoother ride for your vehicle that has a coil spring suspension.

Designed to fit inside existing coil springs to create a variable spring rate, the Airbag Coil-Helper will level your vehicle and assist with more effective braking and handling, even under heavy loading and adverse road conditions.
The Airbag Coil-Helper enables you to control the air pressure in the air helper springs so you can make adjustments for varying loads and road conditions. Spring performance can be altered as easily as inflating a tire.
Coil-Rite airbags will:

  • Maintain a level vehicle – adjustable
  • Maximize the safe load carrying capacity
  • Increase vehicle stability
  • Improve steering and balance
  • Improve ride quality
  • Greatly reduce “bottoming out”
  • Reduce coil suspension fatigue
  • Keep headlights aimed on the road
  • Reduce tyre wear

Please note the following Fitting Advice:
1. Any modifications made to your vehicle that are NOT factory installed or approved by the manufacturer may (MAY) result in denial of warranty claim(s).
2. Drilling required
3. Do not exceed the vehicles legal gross vehicle mass rating (GVM) or axle capacities.
4. Some vehicles may require certification for legal fitment of Airbag Man products, please check with the regulatory authorities regarding this before purchase or fitment of Airbag Man products.
5. Airbag Man has made every attempt to assure that the air helper spring kits listed will properly fit. Chassis modifications made by others that effect suspension dimensions may not provide conditions for proper fit. Due to new model introductions and manufacturer changes, Airbag Man reserves the right to make changes to the list without notification.
6. Some manufacturers use brake proportioning valves to adjust braking force as a function of chassis to axle distance.  If you modify your suspension it effects the function of this value. We suggest that you check with your dealer on proper treatment of this device prior to installation of airbag kits.
7. Full Droop measurements are taken by jacking or lifting the vehicle so that the suspension with all components connected, is at its hanging limit, then measure the gap directly above the centre bolt, from the bottom of the chassis rail (or other nominated position) to the top of the axle or leaf, whichever is closer. Ensure the vehicle is jacked or lifted using suitable safe equipment, and using correct practices.

(CR5070-0)

SKU CR5070-0
Brand Airbag Man
Shipping Weight 6.0000kg
Shipping Width 0.260m
Shipping Height 0.300m
Shipping Length 0.240m
Shipping Cubic 0.018720000m3

More From This Category