Are you tired of driving around in a boring old Ranger? Do you want to take your ride to the next level and show off your wild side? Look no further, because the Offroad Animal Front bar is here to save the day! Not only does it give your Ranger a super aggressive look, but it also has awesome features that will make all your off-roading dreams come true.

With the Offroad Animal Front bar, you'll be able to show off your wild side with its sleek design and optional stealth hoop that can fit a 22" LED light bar. Plus, its lightweight design means your Ranger will still be able to keep up with the fast crowd. And with its better airflow, your motor will stay cool during those long off-roading adventures.

But wait, there's more! The Offroad Animal Front bar also comes with integrated recovery points, ADR compliance, airbag compatibility, and easy fitment of a winch. Plus, the winch can be fitted after the bar is already on, so you can have the best of both worlds. And for those stealthy off-roaders, the bar can even fit an LED light bar inside for that super cool look.

So why settle for the same old Vanilla bull bars when you can have the Offroad Animal Front bar? It's tough, it's sleek, and it's ready to take on any off-roading adventure. Show off your wild and fun side with the Offroad Animal Front bar!

Benefits. 

• Looks.  Yep this bad boy looks great and will give your Ranger that Super aggressive look
• Smaller bar means it weighs less so your Ranger can still be fast
• Better Airflow than the rest to keep your motor cool too.
• Easy fitment of bar and winch
• Winch can be fitted after bar is fitted so,  yeah, nice
• Winch mounts feet down, (actually how most winches were designed,)
• Can have LED light bar fit inside bar for super stealth cool look (up to 22" LED single row)  
• Can have LED light bar fitted into optional top stealth hoop. 
• Integrated recovery points as standard 
• Actually fully designed and tested in Australia by Australians who actually go 4wdriving.

Features

• ADR compliant
• Airbag compatible 
• Only weighs 65kg and is fully made from Steel.  A combination of 3mm body, 5mm winch cradle and mounts.
• Bumper replacement, with no cutting of bumper or grill.  
• Optional top hoop- Stealth hoop which takes up to a 22" LED light bar single row, or 2" round tube
• Welded one piece bar with welded wing supports for super toughness
• Only sits 150-160mm out from front of grill. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Hi lift jacking points included in design
• Suits most low mount winches including Warn Zeon. Rated for winches up to 12,000lbs
• Works with TECH PACK and forward parking sensors
• Works with factory fog lights or easily mount 2 Cube lights (per wing) or up to an 8" LED light bar in each wing. 
• Number plate flip included for those running a winch
• Can be colour coded to vehicle
• Rated 16mm hi-tensile steel Recovery points as standard (rated to 4500kg per tow point)

Here is a comparison of the bolt on hoop options

While the bumper takes most single row led light bars (we suggest the Offroad Animal 22" LED light bar)  

Stealth top hoop has same arrangement for led light bar, fitting most single row light bars, but we suggest the Offroad Animal 22" LED light bar

If you do not wish to run a light bar make sure you tick the option for a cover plate

Included in box

• 1 x Front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x Mesh infill LH
• 1 x Mesh infill RH
• 1 x ACC support bracket
• 1 x Light cover Mesh LH
• 1 x Light cover Mesh RH
• 1 x fog lamp bracket LH
• 1 x fog lamp bracket RH
• 1 x head light infill inner LH
• 1 x head light infill inner RH
• 1 x head light infill outer LH
• 1 x head light infill outer RH
• 1 x centre bash plate
• 1 x under wing panel LH
• 1 x under wing panel RH
• 1 x Chassis bracket gusset LH
• 1 x Chassis bracket gusset RH
• 1 x winch control box bracket
• 1 x number plate flip
• A butt load of nuts and bolts to make it all sit nice and pretty

This bar suits all Next Gen RA Rangers 2022 on

If you have a Tremor model we highly recommend you grab this bash plate as the OEM one looks a bit wrong with this bull bar and will need to be trimmed. 

Install time: 5-6 hours

Install difficulty: 4/10

_______________________________________________________________

*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.

** Installation pricing is based on standard OEM

vehicles using generic wiring harnesses and switches. Any additional

requirements—including factory switch integration, custom wiring, or

non-standard accessories—may incur additional charges payable directly to the

fitting partner at the time of installation. Non-standard or additional items

(such as UHF units or other branded lighting and accessories) can also be

sourced and supplied directly through the fitting partner if required.

Freight: If selecting installation, please choose

freight to the nearest fitting centre. If there is any discrepancy in the final

freight cost, this will be reviewed and adjusted accordingly.

Note: Some images depict prototype

products. The actual final product may vary in appearance.

Colour-coded bars are not an exact paint match; the

finish will be a close approximation only. Please provide your VIN so we can

confirm the correct colour code. Note that selecting colour coding typically

adds an additional 4–6 weeks to the lead time.

If $9999 appears in the freight charge, please check address information is entered correctly as per Australia post.